Alameda Belt Line V2 (ABL), Pre-existing template double entries on switch list Options

[AT RR]

Hi everyone,
Just getting back into MSTS.

I just downloaded the latest Alemedia Belt Line V2 and have run into a problems with the provided template. When I run a switch list I get duplicate cars going to the same location (Same consist number listed twice) but only one actual car in the pick up consist. Also there are some of same car going to two different locations for set out. What is strange is I take the cut of cars and run them into the first location stop and then take them to the second location the cars register as being delivered to both?

Years ago I had this problem with some of the templates I designed and for the life of me I can't remember what the fix was can anyone help?

Would I be better off starting from scratch?

One other question why would the route author produce a stand alone consist file for each car used in the template he did this on the first version of the route which I had problems running until Norm saved the day and released his template. Is this soimething new to AG?

Thanks in advance,
Peter

[jrmeindl]

Hi everyone,
Just getting back into MSTS.

I just downloaded the latest Alemedia Belt Line V2 and have run into a problems with the provided template. When I run a switch list I get duplicate cars going to the same location (Same consist number listed twice) but only one actual car in the pick up consist. Also there are some of same car going to two different locations for set out. What is strange is I take the cut of cars and run them into the first location stop and then take them to the second location the cars register as being delivered to both?

Years ago I had this problem with some of the templates I designed and for the life of me I can't remember what the fix was can anyone help?

Would I be better off starting from scratch?

One other question why would the route author produce a stand alone consist file for each car used in the template he did this on the first version of the route which I had problems running until Norm saved the day and released his template. Is this soimething new to AG?

Thanks in advance,
Peter

Peter,

There was some discussion on the double setouts. There should have been an update for this in AG version 4.2.12. It only happened to when you unchecked the "Check here for sequential pickup/setouts" box. If it was checked, you did not get the dual setouts

http://skylinecomputing.com/forums/index.p...plicate+setouts

I haven't run ALB 2 yet, but was going to try some of my older activites and see what happens. Most of the track looks the same, so I thought Norm's template might be modified a bit to include the new track. I actually modified the template by adding few more paths which made all tracks available for switching in one activity if so desired.

To answer your question about dropping off at both sidings. Yes, it should work and trigger both events by setting out the car at both sidings. Once the event is triggered, it complete as far as the program is concerned. The only way it wouldn't work is if you set the event as reversible. AG does not set up the activity using that check box. In the AE, the events can be set up as reversible. As an example, if you have that checkbox selected for an event it will trigger when a set of cars is dropped off at a siding. If you remove them from the siding, the event is reset to it's state prior to dropping of the cars. I've never used the 'Reversible' parameter for setouts or pickups. I prefer 'Assemble Train at Location' for those sort of things. I do, however, use 'Reversible' for events such as the 'Reach Speed' event. If you have ever used them, they nomally are a one shot event. By checking the 'Reversible' box, they reset and continue to work until you deactivate them. I normally use them for restricted speed zones and turn them on and off using location events.

Jim

[nbeveridge]

Peter,

There was some discussion on the double setouts. There should have been an update for this in AG version 4.2.12. It only happened to when you unchecked the "Check here for sequential pickup/setouts" box. If it was checked, you did not get the dual setouts

http://skylinecomputing.com/forums/index.p...plicate+setouts

I haven't run ALB 2 yet, but was going to try some of my older activites and see what happens. Most of the track looks the same, so I thought Norm's template might be modified a bit to include the new track. I actually modified the template by adding few more paths which made all tracks available for switching in one activity if so desired.

Jim

Jim,

If you update the template for ABL2, how about sharing it here???

[jrmeindl]

Jim,

If you update the template for ABL2, how about sharing it here???

Norm,

It was the ABL version 1 template, not the version 2. As I making my changes, I found a couple of switches that didn't work at the ferry due to the tdb file being incorrect. After emailing William Oliver, I found out that he was working on version 2 and decided to wait and see what changes he made for the newest version. I can post them if anyone is interested. I added two paths that included every region for the paths. This enabled me to create activities with every siding being selectable. I haven't looked at V2 yet, but can in about a week or so to see what can be added.

Jim