Lesnogorsk Russian Route Template, Permissive signalling not responding completely |
Lesnogorsk Russian Route Template, Permissive signalling not responding completely |
Sep 14 2009, 09:02 PM
Post
#1
|
|
Train Master Group: Members Posts: 1,017 Joined: 4-February 07 From: Canada Member No.: 21 |
Hello to all,
I have created a template for my first Russian route, the Lesnogorsk and have started doing some testing. But problems are hampering my testing efforts. I have toggled to permissive the signalling system and seemed to work on the mainline, but not inside the yards. As you can see on the image inside Lesnogorsk yards, I have coupled with the cut and am ready to go. Normally, there would not be any problem going through the dwarf signal just ahead but all attempts on this route have failed and ended the game with an ignored red light warning. I have done the test with and without traffic, ending the same way. The sigscr.dat file is not read-only since the change to permissive have been confirmed by the second window. Normally the stop and proceed indication would let me go ahead but doesn't work here. I am not that good in where I should look inside the sigscr.dat file to investigate for a possible problem Thanks for any help -------------------- Denis Gionet
|
|
|
Oct 4 2009, 05:36 AM
Post
#2
|
|
Train Master Group: Root Admin Posts: 727 Joined: 1-October 03 From: United States Member No.: 1 |
Hello to all, I have created a template for my first Russian route, the Lesnogorsk and have started doing some testing. But problems are hampering my testing efforts. I have toggled to permissive the signalling system and seemed to work on the mainline, but not inside the yards. As you can see on the image inside Lesnogorsk yards, I have coupled with the cut and am ready to go. Normally, there would not be any problem going through the dwarf signal just ahead but all attempts on this route have failed and ended the game with an ignored red light warning. I have done the test with and without traffic, ending the same way. The sigscr.dat file is not read-only since the change to permissive have been confirmed by the second window. Normally the stop and proceed indication would let me go ahead but doesn't work here. I am not that good in where I should look inside the sigscr.dat file to investigate for a possible problem Thanks for any help Denis, This is really surprising since according to the F4 Track Monitor AG was successful in converting the signals to permissive! It shows "stop and proceed" so you really should be allowed to stop, and proceed! I will download the route and see if I can figure this out. This is definitely a new one on me. It would be really nice to see a template for this route, the scenery looks GREAT! I'll let you know what I find. I apologize for the slow response. Thanks, Steve -------------------- Steve Davis
Skyline Computing
SteveDavis@SkylineComputing.com
|
|
|
Lo-Fi Version | Time is now: 3rd June 2024 - 04:26 PM |